Add Network Driver To Windows Deployment Services

• Add Network Driver To Windows Deployment Services Download
• Add Network Driver To Windows Deployment Services Mmc Snap In
• Add Network Driver To Windows Deployment Services
• Add Network Driver To Windows Deployment Services 2016
• Add Network Driver To Windows Deployment Services Configuration

1. Choose a destination server for WDS from server pool and click Next. Choose Windows Deployment Services from server roles. As soon as you check that option, a new window will pop up. Click on Add features. Click Next two times. Click Next (Leave default selection of both deployment and transport.
2. For a list of Configuration Manager versions and the corresponding Windows 10 client versions that are supported, see. In this topic, you will learn how to configure the Windows Preinstallation Environment (Windows PE) to include the network drivers required to connect to the deployment share and the storage drivers required to see the local storage on machines.
3. How to add network and storage drivers into a boot image when using Windows Deployment Services (WDS).

WinPE Driver packs are designed to provide required drivers for WinPE to boot a Dell Latitude, OptiPlex, or Dell Precision workstation for operating system deployment. Dell Family Driver Packs are designed to deploy on multiple models, and are supported by the Dell configuration services.

Depending on the type of computer in the environment and the hardware it contains, you require software from the hardware vendors to make computers in the production environment fully functional. Some of this software may be provided on a CD-ROM or DVD-ROM by the hardware manufacturer; other software must be downloaded from the vendor's Web site .

Deployment Workbench makes adding device drivers to the deployment share an easy process . You simply specify a folder containing one or more device drivers, and Deployment Workbench copies them to the deployment share and organizes them into folders as appropriate. However, you must make sure that you've extracted device drivers from any compressed files containing them. In other words, Deployment Workbench looks for each device driver's .inf file and any related files.

In MDT 2008 you could create driver groups to group together device drivers . You could then associate a driver group with a task sequence. In MDT 2010, you can no longer create driver groups . Instead, you can now create subfolders under the Out-Of-Box Drivers folder in your distribution share . You can import different drivers into different subfolders and then associate each subfolder with a task sequence .

NOTE Windows Deployment Services in Windows Server 2008 R2 also includes new features that make it simpler to ensure that the appropriate drivers are available during a deployment. You can add driver packages to a Windows Deployment Services server and deploy these driver packages to different client computers based on filtering criteria. You can also add boot-critical driver packages to boot images (supported for Windows 7 and Windows Server 2008 R2 images only). For more information on this topic, see Chapter 10.

To add device drivers to the deployment share, perform the following steps:

1. In Deployment Workbench, right-click the Out-Of-Box Drivers folder (or a subfolder you created under this folder) in your deployment share and select Import Drivers to start the Import Driver Wizard.

2. On the Specify Directory page, type the path containing the device drivers you want to add to the deployment share or click Browse to open it .

3. If you want, select the Import Drivers Even If They Are Duplicates Of An Existing Driver check box. Choosing this option allows Deployment Workbench to import duplicate drivers, if they exist, but Microsoft recommends against this .

4. Finish the wizard. Deployment Workbench adds all the device drivers it finds in the folder and its subfolders .

After you add a device driver to the deployment share, it appears in the details pane when the Out-Of-Box Drivers folder (or a subfolder of this folder) is selected in the console tree . It also appears in the deployment share in Out-Of-Box Driverssubfolder[subfolder], where subfolder[subfolder] is the destination specified when adding the driver.

To disable a device driver, perform the following steps:

1. In the Deployment Workbench console tree, click Out-Of-Box Drivers (or a subfolder) in your deployment share

2. In the details pane, right-click the device driver you want to disable and then click Properties.

3. Click the General tab, clear the Enable This Driver check box, and then click OK .

To remove a device driver from the deployment share, perform the following steps:

1. In the Deployment Workbench console tree, click Out-Of-Box Drivers (or a subfolder) in your deployment share

2. In the details pane, right-click the device driver you want to remove and then click Delete

When a device driver is deleted from Deployment Workbench, it is also removed from the Out-Of-Box Drivers folder in the deployment share. In other words, removing a device driver from Deployment Workbench also removes it from the file system.

Creating Task Sequences

A task sequence binds operating system source files with the steps necessary to install them. A task sequence is associated with the following:

■ Operating system Choose an operating system image to use for the build.

■ Unattended setup answer file (Unattend.xml) Create an answer file that describes how to install and configure the operating system on the destination computer. For example, the answer file can contain a product key, organization name, and information necessary to join the computer to a domain. Generally, allow MDT 2010 to control the settings in Unattend.xml and use the MDT 2010 database to configure destination computers.

NOTE This chapter assumes that you are configuring task sequences and deployment points for the purpose of capturing custom images. The settings you configure by using the instructions in this chapter are different than the settings you will configure when deploying images to production computers. For more information about those settings, see Chapter 12.

To create a task sequence for image capture, perform the following steps:

1. In the Deployment Workbench console tree, right-click the Task Sequences folder (or a subfolder you created under this folder) in your deployment share and select New Task Sequence to start the New Task Sequence Wizard.

2. On the General Settings page, provide the information described in Table 6-3 . table 6-3 The General Settings Page

3. On the Select Template page, choose a template task sequence to use as a starting point . You can customize the template later. For the purpose of building images, choose the Standard Client Task Sequence template.

4. On the Select OS page, choose an operating system image to install with this task sequence. Only the operating system images previously added to your deployment point are visible

5. On the Specify Product Key page, select one of the following:

• Do Not Specify A Product Key At This Time.

• Specify A Multiple Activation Key (MAK Key) For Activating This Operating System, and then type the product key in the Product Key box.

• Specify The Product Key For This Operating System, and then type the product key in the Product Key box

For more information about volume activation and product keys in MDT 2010, see Chapter 11, 'Using Volume Activation .' Chapter 11 describes when a product key is necessary. Generally, customers deploying volume-licensed Windows 7 media to 25 or more computers should select the Do Not Use A Product Key When Installing option. Customers deploying volume-licensed Windows 7 media using Windows 7 Multiple Activation Keys (MAKs) should select the Specify A Multiple Activation Key (MAK Key) For Activating This Operating System option and then type a product key in the Product Key box. Customers deploying retail Windows 7 media should select the Specify The Product Key For This Operating System option and then type a product key in the Product Key box

6. On the OS Settings page, provide the information described in Table 6-4 and then click OK . The values you provide on this page are irrelevant because you are creating a build for image capture, and you will change these values during production deployment .

table 6-4 The OS Settings Page

IN THIS LOCATION PROVIDE THIS INFORMATION

table 6-4 The OS Settings Page

IN THIS LOCATION PROVIDE THIS INFORMATION

7. On the Admin Password page, select Do Not Specify An Administrator Password At This Time. Do not specify a local Administrator password for image task sequences so that you can specialize the password during deployment .

8. Finish the wizard.

After you create a task sequence in your deployment share, it appears in the details pane when the Task Sequences folder (or a subfolder of this folder) is selected in the console tree It also appears in the deployment share in Task Sequencessubfolder[subfolder], where sub-folder[subfolder] is the destination selected when creating the task sequence . Deployment Workbench stores metadata about each build in TaskSequences .xml, which is located in the deployment share's Control folder.

To disable a task sequence, perform the following steps:

1. In the Deployment Workbench console tree, click Task Sequences (or a subfolder) in your deployment share .

2. In the details pane, right-click the task sequence you want to disable and then click Properties

3. On the General tab, clear the Enable This Task Sequence check box and then click OK . Alternatively, you can hide the task sequence by selecting the Hide This Task Sequence In The Deployment Wizard check box.

NOTE Disabling a build prevents the Windows Deployment Wizard from displaying it in the list of builds from which a user can choose during an LTI deployment.

To remove a task sequence, perform the following steps:

1. In the Deployment Workbench console tree, click Task Sequences (or a subfolder) in your deployment share .

2. In the details pane, right-click the task sequence you want to remove and then click Delete

To edit the task sequence's answer file (Unattend.xml), perform the following steps:

1. In the Deployment Workbench console tree, click Task Sequences (or a subfolder) in your deployment share.

2. In the details pane, right-click the task sequence containing the answer file you want to edit, and then click Properties

3. On the OS Info tab, click Edit Unattend.xml to open the build's answer file in Windows SIM

For more information about using Windows SIM to edit Unattend.xml, see the topic 'Windows System Image Manager Technical Reference' in the Windows AIK .

DIRECT FROM THE SOURCE

Reducing Image Count

Doug Davis, Lead Architect

Management Operations & Deployment, Microsoft Consulting Services

We put the 2007 Office system and a virus scanner on every image. That way, the customer can be productive regardless of the method we use to deploy other applications. Also, a lot of things just make sense to put in the image so that the user doesn't have to download them later. I can't think of a single customer who doesn't have Adobe Acrobat Reader.

The virtual private network (VPN) and dialer installation programs are in the image, but we don't install them. When we deploy the image, the task sequence checks Windows Management Instrumentation (WMI) to see whether it's a mobile device. If it's a mobile device, we then install the VPN and dialer software; otherwise, we delete the installation programs.

We also never use a product key. Instead, we use the Key Management Service to simplify our images and reduce key loss. Chapter 11 describes the Key Management Service.

Having a single image to deploy is very handy and works well. We encourage people to change an image only when they need new software. Whenever a new update or device driver is required, we just replicate that information and then inject it into the image rather than making a new image every month and replicating the image. If this is the approach you plan to take, image versioning is very important to track.

Editing a Task Sequence

In MDT 2010, the task sequence is a list of tasks to run during deployment . However, it's not a linear list of tasks like a batch script . The task sequence is organized into groups and specifies conditions, or filters, that can prevent tasks and entire groups from running in certain situations .

MDT 2010 uses a Task Sequencer to run the task sequence . The Task Sequencer runs the task sequence from top to bottom in the order specified. Each task in the sequence is a step, and steps can be organized into groups and subgroups. When you create a task sequence in Deployment Workbench, you can choose a task sequence template. A key feature of the task sequence is that it stores state data, or variables, on the destination computer. These variables persist, even across reboots . The Task Sequencer can then use these variables to test conditions and possibly filter tasks or groups . The Task Sequencer also can restart the computer and gracefully continue the task sequence where it left off. These are important characteristics when driving a deployment process from beginning to end.

Task sequences contain the following types of items:

■ Steps Steps are commands that the Task Sequencer runs during the sequence, such as partitioning the disk, capturing user state, and installing the operating system. Within a task sequence, steps do the actual work. In the task sequence templates provided by MDT 2010, most steps are commands that run scripts.

■ Groups The task sequence steps can be organized into groups, which are folders that can contain subgroups and steps . Groups can be nested as necessary. For example, the default task sequence puts steps in groups by phase and deployment type.

You can filter both steps and groups, including the groups and steps that they contain, based on conditions that you specify. Groups are especially useful for filtering because you can run an entire collection of steps based on a condition, such as the deployment phase or type of deployment.

To edit a task sequence, perform the following steps:

1. In the Deployment Workbench console tree, click Task Sequences (or a subfolder) in your deployment share .

2. In the details pane, right-click the task sequence you want to edit and then click Properties

Add Network Driver To Windows Deployment Services Download

3. Click the Task Sequence tab, as shown here, edit the task sequence as described in Table 6-5, and then click OK . For more information about settings on the Properties and Options tabs, see the sections titled 'Configuring Group and Task Properties' and 'Configuring the Options Tab' later in this chapter.

table 6-5 Editing a Task Sequence

TO USE THESE STEPS

Add a group In the task sequence, select the item beneath which you want to create a new group, click Add, and then click New Group . Deployment Workbench creates and selects a new group called New Group

Add a step In the task sequence, select the item beneath which you want to create a new step and click Add. Then choose the type of step that you want to create by clicking General and then choosing one of the following (MDT 2010 supports more steps than those listed here, but they are already in the task sequence or are primarily for server deployment):

■ Run Command Line

■ Set Task Sequence Variable

■ Run Command Line As

Deployment Workbench creates and selects a new step with a name relating to the type of step you're creating.

Add a reboot In the task sequence, select the item beneath which you want to add a reboot, click Add, click General, and then click Restart Computer Deployment Workbench creates and selects a new task that restarts the destination computer

USE THESE STEPS

Add an application In the task sequence, select the item beneath which you want to add an application installation, click Add, click General, and then click Install Application Then select the Install Application step you just added, and on the Properties tab, click Install A Single Application. Choose the application you want to install from the Application To Install list.

IMPORTANT If you install antivirus software as part of the task sequence, be sure to carefully test how the antivirus software interacts with the deployment process before moving to a production environment. Antivirus software can prevent MDT 2010 from successfully deploying Windows 7 and applications. If necessary, you can always disable the antivirus software and then re-enable it at the end of the task sequence.

To edit an item in a task sequence, select the item you want to work with and then edit the settings in the right pane

NOTE MDT 2010 includes a variety of special steps, such as the Enable BitLocker task or Install Operating System step, that you can configure. You change settings for these steps by selecting the step in the left pane and then configuring the step on the Properties tab. In general, the most interesting steps to configure are Validate (under Validation and under PreinstallNew Computer Only), Format and Partition Disk (under PreinstallNew Computer Only), Install Operating System (under Install), Apply Network Settings (under State Restore), and Enable BitLocker (under State Restore).

To remove an item in a task sequence, select the item you want to work with and then click Remove. If a group is removed, Deployment Workbench removes the group and everything it contains, including subgroups and tasks

To reorder an item in a task sequence, select the item you want to work with and then click Up or Down to change its position within the task sequence . During deployment, the Windows Deployment Wizard runs the tasks from top to bottom in the order specified.

Continue reading here: Configuring Group and Task Properties

Was this article helpful?

What Is Windows Deployment Services

What is Windows Deployment Services? Windows Deployment Service is a server technology of Microsoft for network-based Windows operating system installation. WDS is designed for remote deployment of Windows Vista, Windows 7, Windows 8, Windows 10, Windows Server 2008, Windows Server 2012, and Windows Server 2016, but it also supports other operating systems.

Add Network Driver To Windows Deployment Services Mmc Snap In

Microsoft WDS is used in conjunction with PXE (Pre-Boot Execution Environment) to load a mini-Windows version called Windows PE to perform installation and maintenance tasks. WDS is used both as a storage repository for PXE network boot images and as a repository for actual operating system images to be installed on the target computer.

When multiple boot images are available, PXE booting through WDS will provide you with a boot menu to select the image to be loaded. Maybe, you are interested in this post - How to Use the PXE (Preboot Execution Environment) Boot.

Purpose of Windows Deployment Services

This part introduces the functions of Windows Deployment Services.

• Facilitate the deployment process.
• Allows you to install a network-based operating system.
• Support the deployment of computers without any operating system.
• Provide end-to-end deployment solutions for client and server computers.
• Use existing technologies, such as Windows PE, Windows image files (.wim) and virtual hard disk (.vhd and .vhdx) image files, and image-based deployment.

Requirements of Windows Deployment Services

Hardware Requirements

• RAM: minimum of 4GB
• Processor: 64-bit processor
• Hard Drive Space: At least 10GB or depend on system ISO and software's size.

Run-time requirements

Windows Deployment Services can be used as an add-on to Windows Server 2003 with Service Pack 1 (SP1) and is included in operating systems starting from Windows Server 2003 and Windows Server 2008 with Service Pack 2 (SP2). The WDSPXE Server API requires the WDS server role on the server to implement a custom PXE provider.

The WDS client API needs to be installed during the Microsoft Windows pre-installation environment (Windows PE 2.0) phase. As part of the implementation of a custom WDS client's network boot process, a RAMDISK bootable image of Windows PE 2.0 in WIM format must be downloaded.

How to Configure Windows Deployment Services

Before you start to configure Windows Deployment Services, you had better change Windows Server hostname, turn off Windows Server firewall, and set static IP on Windows Server. After that, you can go to configure Windows Deployment Services.

What is the static IP? What is dynamic IP? What are the differences between static and dynamic IP? This post shows answers.

You can use MMC to locate the WDS management unit in the management tool folder or execute the command wdsmgmt.msc to load the console for the first time to start the WDS management unit. Follow the steps below:

Step 1: In the nested hierarchy under Server, if you notice a small yellow exclamation mark next to the server's hostname, it means that your server is not configured with Windows Deployment Services.

Step 2: Right-click the server name and select Configure Server from the context menu. Then, click Next to continue.

Step 3: There are two options for you – Integrated with Active Directory and Standalone server. You should notice that - once the integrated mode is selected, it cannot be downgraded to standalone mode, although standalone mode can always be upgraded to integrated mode.

Add Network Driver To Windows Deployment Services

Step 4: Select the default path or enter a custom path to store the directories, then click Next.

Step 5: Then, you will receive a warning message, you just need to click Yes to confirm.

Step 6: Now, the PXE Server settings will be configured. By default, selecting Respond to All Client Computers (Known And Unknown) works well. For additional security, you need to check the Require Administrator Approval For Unknown Computers box.

The configuration process for Windows Deployment Services takes several minutes, depending on the speed of the server being used. Once Windows Deployment Services has been successfully configured, it'll be ready to use.

Add Network Driver To Windows Deployment Services 2016

Final Words

Add Network Driver To Windows Deployment Services Configuration

To sum up, this post has introduced what Windows Deployment Services is, and you can also know the purpose and requirements of the Windows Deployment Services. Besides, this post introduces how to configure it. I hope that this post can be helpful to you.